PIN code
You can use the PIN code to protect against unauthorized
calls if the following conditions are met:
•
The PIN code request is turned on
•
The phone is powered off
The next time the phone is turned on, you must enter the
correct PIN code to make calls or use the menus.
PIN2 code
Enter the PIN2 code for the following procedure:
Set up or change fixed dialing numbers (page 67)
Restriction
password
Required by the restrict calls feature.
66
Copyright © 2004 Nokia
PIN code request
You can activate the PIN code request to prevent unauthorized use of your phone.
If you set the PIN code request to On, your phone will ask for the code each time
you turn the phone on. When the phone is locked, calls still may be possible to the
official emergency number programmed into your phone.
ACTIVATE
1
Select Menu > Settings > Security settings > PIN code request.
2
Enter the PIN code supplied by your service provider and select OK > On > OK.
DEACTIVATE
1
Select Menu > Settings > Security settings > PIN code request.
2
Enter the PIN code supplied by your service provider and select OK > Off > OK.
Change
You can change your PIN or PIN2 code to any 4-digit to 8-digit number. You must
activate the PIN code request first. See “PIN code request” on page 66.
1
Select Menu > Settings > Security settings > Change access codes > Change
PIN code.
2
Enter the current PIN code, select OK, enter the new PIN code, and select OK
.
3
Enter the new PIN code again to verify and select OK.
Note: If you make a mistake while entering the code, Code Error appears.
Start again at step 2 and be careful to enter the correct code. If you enter the
wrong code three times in a row, the PIN code is blocked. To unblock the PIN
code, you need a personal unblocking key (PUK) from your service provider.